Phasa IV 30/30

Erbjuder samtidig varmluftsnitning av enstaka eller upp till ca. 30 st nitpunkter inom ett detaljmått på ca. 300 x 300 x 75 mmm. Ideal för större detaljer med flera nitpunkter.

Konstruerad för att trycka på okänsliga B-ytor istället för känsliga A-ytor.

The IV30/30 machine provides support and location to the B face while processing, minimising any risk of damage on the A face – particularly important where painted or other suseptible surfaces are employed.

A dedicated product machine, free standing with lightguard protection it ensures that this design with its top loading is very user friendly in operation.

The machine will process all common thermoplastics – with or without filling materials.

 

Beskrivning:

• General Construction – Welded steel box section frame, cast ground machine base.
• Electrical System – 3 x 400V a.c. 50/60 Hz – providing 24V d.c. control supply.
• Electrical Protection – Via RCCB and MCB overload trips.
• Pneumatic System – SMC valves and air cylinders with Origa rodless index cylinder.
• Temperature Control – Omron E5C3 Temperature control – sensing through K thermocouples.
• Heating System – 2 x 3,000W. energized by 28amp SSR – pulsed through Temperature Controller.
• Process Control – Siemens.
• Operator Interface – Siemens.
• Guard System – Light Guard operator loading bay protection & total enclosure of process cell.
• Documentation – Comprehensive instruction and maintenance manual.

 

Tekniska data:

•  Standard processarea 300 x 300 x 75 mm djup
• Max antal nitpunkter 30 positioner
• Mått (Dj.x B x H) 1.200 x 1.300 x 2.015 mm
• Nominal Cycle Time 20 seconds
• Basic Tool Change Time 15 minutes
• Nett Weight (excluding tooling) 1.000 kg.
• Air (subject to product & output) 8 cfm (4 dm3/s) @ 6.0 bar
• Electricity 2 x 3,000 watt @ 240 V a.c.

Extrautrustning:

•  Integrering med automatiserad i- och urplockning

 

Tillbehör:

•  Fixturverktyg
• Nedhållare
• Givare för kontroll av detalj, läge, färg etc.